Making College A More Peaceful Time - 954 Words

Making College a More Peaceful Time In America, students usually go through about 13 years of schooling until they can finally attend a college or university. It is often the first time where adolescents will have more freedom in their lives because it is their choice on whether they want to continue their education or not. If they choose to continue their education, they will have to take on more responsibilities in their life that will help them with their future. A student’s journey through college can often be a rollercoaster because they are experiencing multiple new situations while having to focus on their education. This can cause students to have problems that they do not always for because they do not know how to handle their situation. A few of the problems that college students face are having trouble paying for tuition, procrastination with their work and feeling stressed out. It is going to be tough for a student handle these problems but if they have hope and co me up with a plan these problems can get solved. The expenses for college and especially university can be extreme for any student to pay because tuition can be thousands of dollars. Besides the wealthy, it will be very difficult for anyone to pay this tuition because most people do not earn enough money. Getting a student loan is a decent option for the time being, but it can be difficult to pay off the loan in the long run. The best option to choose is to apply for a scholarship because it does notShow MoreRelatedRacism At The University Of Mississippi1233 Words   |  5 PagesImagine being a student of low economic status that has always dreamed of going to a world renowned university but the stench of racism still looms at the well-known college. The racism displayed at this university is undeniable and very visible which in result scares away many diverse students. Colleges claim to be diverse but with the lack of minorities due to the recognizable racism issues and problems t his proposes an important matter. Racism at The University of Mississippi can be solved byRead MoreNo American Dream for Some747 Words   |  3 Pagesmany years. Unfortunately, that dream was not for all Americans during the time of segregation. Eventually it was possible due to two very successful African-American leaders. These two inspirational men had the same idea of making America a better country, but they did not have the same strategies as in to how to make it better. Martin Luther King believed in reaching African-American equality in the most peaceful way possible. â€Å"Darkness cannot drive out darkness: only light can do thatRead MoreCosmopolitan s : Myth Or Truth?1531 Words   |  7 Pagespeace cannot be created, it has to be naturally formed by people who understand one another, and understand that certain places need to be peaceful. In Elijah Anderson’s The Cosmopolitan Canopy; Race and Civility in Everyday Life, he describes places called â€Å"Cosmopolitan Canopies†. According to Anderson, cosmopolitan canopies are places where everyone is peaceful and civil towards one another. People of all races get along in these places and no one outwardly judges each other in a harsh manner. JudgingRead More How to be a Good College Student Essay541 Words   |  3 PagesHow to be a Good College Student College is a competitive environment; in order to succeed in it a student needs certain skills. Those skills can only be learned. A college professor mentioned that there five basic rules that need to be followed in order to become a good student: study, do all the homework and the assigned reading, attend class, and, most importantly, develop self-discipline and time management 1. In the following lines, a detailed analysis of those different steps will be doneRead MoreGandhi : Man Of Power853 Words   |  4 Pages Gandhi: Man of Power When we think of leaders, we all have certain characteristics that come to mind. We consider those who are leaders, to be a person who had done something special in their time. That something may have changed something in their local community, or it may have changed the world (Lal, 2015). World history has known many examples of leaders that made a big change in the world. In the United States, there is little doubt that Abraham Lincoln and Martin Luther King are examples ofRead MoreMahatma Gandhi Research Paper1409 Words   |  6 PagesGandhi) raised him into a 6 sibling family. Mahatma Gandhi attended Samaldas Arts College in 1891 as that’s where he got most of the education at the college level. Gandhi had 4 sons with his wife Kasturba Gandhi who was born in 1833 and later passed in 1944. Mahatma was later assassinated by in January of 1948 in the Birla House of New Delhi India, as his killer (Nathuram Godse) shot him in the chest multiple times before he took his last breath. The way Gandhi influenced the citizens of India andRead MoreThe Love of My Life Essay1493 Words   |  6 Pages T. Coraghessan Boyle once said â€Å"As strong as love might be, there is always something stronger that could come along and shatter it† (After). T. Coraghessan Boyle was born in 1948 as Thomas John Boyle in Peekskill, New York. When Boyle went to college he never dreamed that one day he would have a major in Literature. He originally went to major in music as an aspiring saxophone player at SUNY Potsdam (Auteur†). â€Å"That did not work out because I did not have near the talent of my colleagues† heRead MoreMy Career Choice: Fashion Designer Essay775 Words   |  4 Pagesa creative side of my art ability and I want to make my clothing affordable for all as well. I think I influenced myself to wanting to become a fashion designer because I have a passion for art and wanting to become a fashion designer. I enjoy making sketches of clothing that one day will hopefully be available in stores all over. Fashion designing in my opinion is a way to express the unique side of your creativity, also fashion designing is a career that I believe I can achieve in so highlyRead MoreI Am Ready For College929 Words   |  4 Pagesdidn’t matter. What mattered right now was getting to the office on time. I needed to talk to him about something very important and if I was late that would be crucial time wasted. When I finally managed to make it to his office I was greeted with a hello and a huge smile as I quickly sat down. I plopped my bag next to me and we started talking. This time it wasn t to discuss what classes I should be taking to get ready for college, but it was about my family. I found myself in a state of uneasinessRead MoreImportance Of Freedom Of Speech1455 Words   |  6 Pagesin place. Richard Allsop believes the Greeks may have been one of the first nations to develop this system. â€Å"In Athens, the reforms of Solon in the 590s BC extended the right of citizens to express opinions, and the concept of free speech became a more practical reality after the reforms of Cleisthenes in Athens around 508 BC† (Allsop The Difficult History of Free Speech). It wasn’t until 1215 AD when the first basic human rights were established in the Magna Carta. While the Magna Carta didn’t explicitly

Commedia dell’arte is a performance style that originated...

Commedia dell’arte is a performance style that originated in Italy emphasizing pantomime, improvisation, and ensemble acting, using over the top movements to accentuate emotions on a bare stage. Although shows presented by commedia dell’arte troupes were improvisations they were heavily influenced using an array of stock situations along with very well-developed masks (characters). Commedia dell’arte masks have molded the creation of characters from William Shakespeare’s â€Å"Merchant of Venice† to Matt Groening’s â€Å"The Simpsons†. Keeping society entertained at every age. Unlike most masks in theatre, or even masks for ceremonial purposes, performers in commedia dell’arte wear masks that cover half of their face leaving their mouths free.†¦show more content†¦The use of masks was of a great significance to the early performers. (Marczak, 7) Early in the life of commedia dell’arte it quickly became normal to call the â€Å"character† â€Å"the Mask†. Performers would be the Mask of Il Capitano, or the Mask of Pantalone. This notion of being the mask can get confusing as not all commedia dell’arte characters wear masks that convey who they are. â€Å"Lovers are the Commedia stock characters that do not wear masks† (Sullivan 14). In this case the Masks are often referred to as stereotypes. This wouldn’t be very accurate. Stereotypical characters are very broad two dimensional characters that are based on a class of persons that have been stuck with prejudices and generalizations. Although old men are salacious and money-grubbing that isn’t all the Mask of Pantalone must be this way. If done right he is so much more than that, but that is left to the performer that takes on the Mask to develop with their own flair. Often we find Il Capitano playing the false romantic lead. Since he is part of the Vecchi (old people) one of his common functions is to interfere with the innamorati or young lovers. He is often hired by the father, Pantalone, to protect his daughter. Upon which Il Capitano often falls head over heels in love with her, creating opportunities for a great lazzi to occur. Lazzi are rehearsed comical bits added throughout the performance at the performer’s

Bite Mark Analysis Free Essays

Criminal cases many times call for the examination of evidence that can tie a suspect or victim to a crime scene or to one another. These physical traces frequently include blood and other bodily fluids, hair, fibers, and even bite marks. Here we will focus our attention to the latter and its accuracy, as it applies to the field of forensic science referred to forensic odontology or forensic dentistry. We will write a custom essay sample on Bite Mark Analysis or any similar topic only for you Order Now Forensic odontology is the field of forensic science dealing with the recognition of unique attributes present in each individual’s dental composition. 1] This branch of forensics relies heavily on extensive and detailed knowledge of the teeth, jaws, and dental anatomy possessed by a dentist. In addition to this knowledge, the forensic dentist must be well-versed in the interpretations of radiographs, pathology, charting, and types of dental treatment. The forensic dentist is dutifully responsible for the proper handling, assessment, and evaluation of dental evidence in the name of justice. The dentist is the key to identification based upon the distinctive features present in the dental structures of each individual. Identification of deceased individuals who cannot be identified by other means, identification of human remains, identification of victims in mass fatalities, assessment of bite mark patterns, and age estimation using teeth are all part of the role of forensic odontologists as well. [2] Identification of an assailant by comparing a record of their dentition with a record of a bite mark left on a victim and the presentation of bite mark evidence in court as an expert witness are also done as part of the job. Bite mark comparison is one of the major and newer parts of this forensic discipline that has been evolving since the 1970s and has played a major role in many cases and the convictions of many criminal including the infamous Ted Bundy who was convicted solely on evidence of a bite mark analysis. However, recently, there has been a lot of debating around the accuracy of a bite mark comparisons and if it can truly assist in accurately identifying suspect as the biter in an attack. For example, in 1991 Ray Krone, a former letter carrier without a criminal record, honorably discharged from the U. S. Air Force was charged with taking the life of a Phoenix cocktail waitress, Kim Ancona. A body examination revealed that she had been stabbed eleven times and bitten on the left breast and on her neck. Forensic evidence, or lack of it, indicated that there were no fingerprints and other bodily fluids although there was indication that she had been sexually assaulted. There was little evidence that tied Krone to the crime except for evidence of the bite mark on the victim’s breast, which a state forensic odontologist, Dr. Raymond Rawosn, said matched his very distinct teeth. The bite mark testimony of Dr. Rawson convinced the jury that Krone was guilty and he was convicted. [3] During the time of prosecution, forensic DNA technology was not generally available, but once it was, Ray Krone was proved innocent of the crime. A DNA test not only established that he was not involved in the fatal stabbing, but that also identified the true perpetrator – a person already incarcerated on another unrelated offense. After being cleared by DNA, Ray Krone walked out of the Arizona State Penitentiary at Yuma on April 8, 2002, a free man. 4] In another case, Ricky Amolsch, 38, ended up in jail for ten months over a mistake that a forensic dentist made. His girlfriend, Jane Marie Fray was gruesomely stabbed twenty-two times and an electrical cord was wrapped tightly around her neck. She was also bitten near her left ear. Amolsch was arrested, photographed and fingerprinted. The chief forensic odontologist for Wayne and Oakland Counties, Dr. Allan Warnick’s claims of a bite mark match persuaded the district judge to sign a capital warrant. The preliminary hearing relied on this evidence alone with the forensic dentist, Dr Warnick, giving a compelling testimony. Since Amolsch was not eligible for bond, he had to stay in jail until his trial, and during that time, he lost his home, his savings and his children. [5] After one of Warnick’s other cases was challenged, officials re-examined Amolsch’s case. Dr. John Kennedy, another forensic dentist, reviewed the case and gave a second opinion that it was someone else, not Amolsch, who had bitten Fray’s face. Two other forensic dentists agreed and Amolsch was released from jail. It is true that a human bite mark inflicted by an attacker on the skin of a victim may leave a definitive identifiable pattern that can be identified as being made by a certain set of teeth. If a suspect is apprehended his teeth are reproduced by taking impressions of the teeth and pouring plaster into the impression, thus producing a plaster model. The plaster models of his or her teeth are then put on a scanner and scanned to make a digital image. A tracing of the biting edges of the teeth is then made either using the omputer or tracings from the printed image. This tracing is then superimposed on the bite mark photo, either manually or electronically using a scanned image of the bite mark, to determine if a match can be made. [6] Bite mark analysis is based on two postulates: a) the dental characteristics of anterior teeth involved in biting are unique amongst individuals, and b) this asserted uniqueness is transferred and recorded in the injury. [7] However, some bites are force ful enough to leave a good impression, others are not. A bite might penetrate the skin, but often only leaves bruising—and sometimes the blood marks of a bruise are mistaken for the impression of a tooth. It also seems to be the case that skin gets distorted when bitten or the teeth slide during the act of biting. [8] Furthermore, the level of distortion tends to increase after the bite mark was made. A studies suggest that for the bite mark to be accurately analyzed, the body must be examined in exactly the same position it was in when the bite occurred which can be a difficult if not an impossible task to accomplish. In addition, bite mark analysis is also controversial because dental profiles are subject to change. The loss and/or chipping of teeth, or the alteration of arch configuration through a variety of procedures, such as the use of braces, is common in human populations. The onset of oral diseases such as dental caries has been shown to alter the arch and tooth configuration and must be taken into account when comparing a dental profile to the bite mark after a significant amount of time has passed since the mark was made. 9] All of these variables affect the validity of a bite mark analysis and trying to identify an biter through the uniqueness of his or her dentition. One particular case that highlighted the lack of uniqueness in bite marks involved two suspects accused of attacking a man that had sustained a bite mark injury. Two separate forensic dentists, one representing the prosecution and one the defense, were brought in to analyze the mark. They reported conflicting results. One found the mark to come from suspect A and the other said it was from suspect B. This disagreement resulted from the fact that even though the two suspects had dental features making them unique, the bite mark itself was not detailed enough to reflect them. Therefore, the mark could have reasonably come from either of the men[10]. The equivocal outcome demonstrated in the case emphasizes the difficulty in proving uniqueness. In conclusion, not all bite marks have the level of forensic value necessary to identify just one individual. Now, individual characteristic within a bite mark or in a person’s dentition is a distinguishing feature, trait, or pattern. Individual dental characteristics are reported to be features that are unique to an individual variation within a defined group. The presence of worn, fractured or restored teeth is valued as unique features. If a bite mark possesses the reflection of such a feature(s), the degree of confidence in a match increases. It is actually counter-intuitive to assume enamel chips, fractures, and dental restorations are always inherently unique. The shape of human teeth is quite constant in nature and their changes over time are based on common events. How to cite Bite Mark Analysis, Papers

Essay on Intersectionality in the Criminal Justice System Example For Students

Essay on Intersectionality in the Criminal Justice System The criminal justice system is dynamic and has changed rapidly since the works of Cesare Beccaria and Cesare Lombroso during Enlightenment Period and this reflects in the issue of intersectionality with the changing approaches taken towards concepts of gender, race and class. Sexual assault will be a predominate study used throughout the essay to examine the different approaches and issues between traditional and non-traditional justices. This essay will first establish where are these intersectionalities found in terms of sexual assault cases and the challenges victims face in the legal process with traditional approaches then followed by a comparison to the transition towards non-traditional alternative justice system has responded with a deeper insight into restorative justices and its effects on resolving these challenges. The role of alternative justice and the key challenges in disproportionate crimes are also important aspects of intersectionality in Australia as they aim to r esolve challenges women and the mentally disabled encounter during processing through court in the criminal justice system. Gender is predominating in the criminal justice system and sexual assault exemplifies the contrast found between the traditional and non-traditional justice systems employed over time. Sexual assault poses a social threat to all aspects of community, spreading insecurity in 43400 victims across Australia and 13300 victims in NSW alone as indicated in the recent Australian Bureau of Statistics Crime Victimisation Report. (ABS 2011, p. 40) There has also been an increase of sexual assault by 51% since 1995 with an average of 4% every year. (ABS 2010) Another major issue within the boundaries of sexual assault is that it holds one of the lowest prosecution rates with only 1 in 10 incidents able to prosecute the offender as guilty. (Fitzgerald 2006, Pg. 1) Sexual assault perpetrators adhere to this as they act towards their victims, women in particular to gain a sense of control especially from low socio-economic backgrounds compared to the middle and upper class. (Fitzgerald 2006) The a bundance of statistics and reports conducted all imply that sexual assault is still a predominate issue with disproportionation of not only in gender of the victim but also in age and social class within the criminal justice system. Beyond the victimisation of women in the criminal justice system there is an abundance of research indicating that intersectionality is evident in policing and judicial roles. With 63.1% of female officers compared to the 14.2% of male officers reporting to have been exposed to sexual violence during service. (Prenzler, 1995) The US has a long track record of male dominating roles in the judicial system since there has been only 4 female compared to 108 male Associate Justices in the Supreme Court and half of them were only recently introduced under the Obama administration. The policing and judicial roles in the criminal justice system are imbalanced in gender with high social backgrounds that does not reflect the demographics of sexual assault victims thus the intersectionality is widened with the contrast in understanding. As seen with the issue of intersectionality in sexual assault cases, age is just as vital as gender in the criminal justice system. The victimisation rate of all sexually assaulted victims between ages 10 to 14 being 4 times greater than all the other age groups. (ABS 2010) These children similarly to women have several reasons for not approaching or not being approached by the criminal justice system. The fear of their identity becoming exposed to public knowledge, personal shame and embarrassment and reprisal from the offender especially in rural or isolated regions, victims prefer to disclose sexual assault incidents. (Borzycki 2007) With this it is estimated that only 30% of all sexual assault incidents are reported to police and only 20% of those reported incidents are investigated and undergo criminal proceedings. (AIC 2007) In response to the injustice of sexual assault, the traditional approaches of the criminal justice system has performed minimal or negative impact in reducing this intersectionality. Labelling the offender through their gender during proceeding in the courtroom to the public and on the media would affect their behaviour and this reflected in sexual assault cases. Deviants who were previous offenders and become labelled by society as ‘rapists’ risk sexual assault in correctional facilities, loss of their housing, occupation and thus encourage deviancy amplification and recidivism in the process of identity transformation. (Lemert 2000) Sexual offenses including sexual assault are the second mostly predominant serious offence committed by men and this gender inequality affects the attitudes of the criminal justice system on victims and offenders. This sense of stereotypical gender labelling creates schemas and promotes power motives for sexual aggression in men (Meyer 2000 ). This stigmatisation of gender which poses aggressive behaviour towards women is indicated through strategies employed to maintain this control by the offender include the isolation of the victim, humiliation and manipulation of the victim or her environment. (Clark Quadara 2010) The labelling of gender roles and criminalising offenders publically does not reduce the occurrence of sexual assault and instead provokes its recidivism and creating this ‘revolving door’ in the criminal justice system to past offenders. Depression And Mental Illness (Crime) EssayOne of the biggest flaws in the criminal justice system in tackling intersectionality is seen in the series of cases of sexual assault. Victims influenced by their gender or mental health are greatly undermined with traditional approaches taken. Non-traditional and alternative justice systems have provided some more benefits in aiding victims with increase in awareness and prevention efforts but the issue is still widely evident today and will continue to shadow the criminal justice system. There has been a movement to simply treating victims as property during the Medieval Period, origins of feminism in movements of the 1970’s, the institution of legislations to increase accountability including the ‘Violence Against Women Act’ in the United States and the ‘Declaration on the Elimination of Violence Against Women’ on an international level to the current focus of criminology in crime prevention. There have been radical changes since the 1940’s victims’ movement that instigated alternative justice which has resolve some but not all of the challenges due to intersectionality faced by women and the mental disabled in the criminal justice system. Bibliography †¢ Australian Bureau of Statistics. 2008. Recorded Crime Victims, Australia. Cat. No. 4510.0. †¢ Australian Bureau of Statistics. 2009. Recorded Crime, Victims 2009, Cat. No. 4500.0. †¢ Australian Bureau of Statistics. 2011. Crime Victimisation, Australia. Cat. No. 4530.0. †¢ Austlii. 2001. New South Wales Law Reform Commission Report 80. Available at: http://www.ipc.nsw.gov.au/lrc.nsf/pages/R80APPENDIXB . †¢ Australian Institute of Criminology. 2004. Strong link revealed between drink spiking and sexual assault, . http://www.aic.gov.au/media/2004/november/20041112.aspx. . †¢ Australian Institute of Criminology. 2007. â€Å"Guilty outcomes in reported sexual assault and related offence incidents†, Crime Facts Info, no. 162. †¢ Australian Institute of Criminology. 2010. Trend in sexual assault, . http://www.aic.gov.au/statistics/violent%20crime/sexual%20assault.aspx. . †¢ White, R. Cunneen, C. 2002. Social Class, Youth Crime and Justice. SAGE Publications, London. †¢ Borzycki, M. 2007. â€Å"Pilot study on sexual assault and related offences in the ACT: stage 3†, Research and Public Policy Series, No. 79, Australian Institute of Criminology. †¢ Clark, H Quadara A. 2010. Insights into sexual assault perpetration: Giving voice to victim/survivors’ knowledge, Australian Institute of Family Studies. †¢ Fitzgerald, J. 2006. The attrition of sexual offences from the New South Wales criminal justice system. Contemporary Issues in Crime and Justice, 92, 1-12. †¢ Lemert, E, Lemert, C, Winter, M. 2000. Crime and Deviance, Rowman Littlefield, Lanham. †¢ Lievore, D .2004. Recidivism of Sexual Assault Offenders: Rates, Risk Factors and Treatment Efficacy, Australian Institute of Criminology. †¢ Lievore, D .2004. ‘Victim credibility in adult sexual assault cases’, Trends and issues in crime and criminal justice, no. 288. Australian Institute of Criminology. †¢ Meyer, J 2000, Brief Summary of the Root Causes of Sexual Assault. Colorado Coalition Against Sexual Assault, . Available at: http://www.ccasa.org/documents/Root_Causes_Short_Descriptions.pdf, . †¢ Prenzler, T. 1995. Equal employment opportunity and policewomen in Australia. Australian and New Zealand Journal of Criminology, 28/3, 258-77. †¢ Strang, H. 2002. Repair or Revenge: Victims and Restorative Justice. Clarendon Press, Oxford. †¢ Taylor, N. 2007. ‘Juror attitudes and biases in sexual assault cases’, Trends and issues in crime and criminal justice, no. 344. Australian Institute of Criminology. †¢ Taylor, N Joudo, J. 2005. â€Å"The impact of pre-recorded video and closed circuit television testimony by adult sexual assault complainants on jury decision-making: an experimental study†, Research and Public Policy Series, No. 68, Australian Institute of Criminology.

anxious and nervous

Have you ever felt so anxious and nervous that you would go to any extreme to relieve that feeling? Well, downers are drugs that many people use to relax and bring themselves down from feeling anxious or nervous. These drugs not only make you feel less anxious or nervous but they depress the central nervous system and produce a relaxing to sleep-inducing effect depending on the drug dose that is taken. Downers also slow down and depress the level of arousal in the brain by slowing down the nerve cells in the central nervous system, dull thinking abilities and reduce inhibitions. Downer drugs are not all that bad. Some of these drugs are used for medical reasons, actually prescribed by doctors. Some of the sicknesses that downers are used to treat include insomnia, to help manage anxiety, to reduce convulsiveness, and for neuromuscular disorders. They are most often prescribed today as tranquilizers and sleeping pills. Some examples of tranquilizers are Valium, Librium, and Xanax. Some examples of sleeping pills include Dalmane, Halcion, and Resoril. It is said that over the last decade an estimated six hundred million prescriptions were processed for minor tranquilizers in the United States pharmacies alone. Downers, which were once thought to be the perfect sedative for the terminally nervous, insomniacs, epileptics, mental patients and also used for anesthesia before surgery is now found to be very addictive. Downers as a whole have many risks and side effects to their users. Being downers are a depressant, they reduce cognitive and motor skills and decrease judgment and increase reaction time (meaning the time it takes to react increases.) Subtle effects can continue for hours or days after the use of downers because of the length of time it takes to break down some depressants in the body. Because of a very high abuse to downers, manufactures now warn users against using sleeping pills for more than a week ...

Tunku Abdul Rahman Essay Example

Tunku Abdul Rahman Essay Example Tunku Abdul Rahman Essay Tunku Abdul Rahman Essay Essay Topic: Maus Sir Tunku Abdul Rahman Putra Al-Haj ibni Almarhum Sultan Abdul Hamid Halim Shah was the Chief Minister of the Federation of Malaya from 1955 and became the countrys first Prime Minister after its Independence in 1957. Born in a royal family in Kedah, Abdul Rahman was the son of 24th Sultan of Kedah and went to become the founding father of the independent Malaysia. Before attaining independence of the country, Abdul Rahman was also a member of the United Malays National Organization, an organization struggling against Britains Malayan Union. Also known as Bapa Kemerdekaan, he became the first Prime Minister of the country after Sarawak, Sabah and Singapore merged to form Malaysia in 1963. He played a key role when the Organization of Islamic Conference was established in 1969 and served as its first Secretary-General. Childhood Early Life Abdul Rahman was born on 8 February 1903 in Istana Pelamin, Alor Star in Kedah to the 24th Sultan of Kedah Sultan Abdul Hamid Halim Shah and his sixth wife Cik Menjalara. He was the fourteenth son and twentieth child of his father. As a child Abdul Rahman was raised in Isatan, the Palace, which was built by a Chinese contractor and had a royal childhood with a number of servants around him. Prince Abdul was sent to a Malay Primary School Jalan Baharu in 1909 and was later moved to the Government English School in Alor Star, which eventually became known as the Sultan Abdul Hamid College. In 1911, little prince Abdul was sent to Debsirin School in Bangkok to study with his three brothers. He returned to Malaya in 1915 and resumed his studies at Penang Free School. After three years in 1918, he enrolled at St. Catharine’s College in Cambridge University with the Kedah State Scholarship and graduated with a bachelor degree in Arts in 1925. At that time, he drew national attention and was praised as the first student to receive a scholarship from Kedah State for studying in the United Kingdom. Early Career After finishing his graduation, Abdul Rahman served in the Kedah public service and was made the District Officer of Kulim and Sungai Petani. At that time, the colonial Malaya was totally dominated by the British officers, with the only exception of Abdul Rahman who was a Malaya and had concern for his fellow people of Malaya. The two could never come to terms and he often had to pay for it by loosing promotion to higher positions. However, the British Administration did not dare do anything against him, as he was a son of the Sultan and a price of Malaya. Few years later, Abdul went to England and stayed there briefly before finally returning to Malaya following the eruption of the World War II. He continued his law studies at Inner Temple in 1947 and after admitted to bar in 1949, he returned to Malaya where he was appointed at the Legal Officer’s office in Alor Star in the same year. Further, he was made a Deputy Public Prosecutor in Kaula Lampur and president of the session’s court. Abdul Rahman was also a member of the United Malays National Organization, an organization struggling against Britain’s Malayan Union. In 1951, a conflict surfaced within the UMNO forcing its president Datuk onn Jaafar to resign and the person replacing him was Abdul Rahman, who eventually seized the position for the next twenty years. Independence of Malaya Abdul Rahman began his campaign for Malaya’s independence in 1954. His initial efforts failed to achieve anything as the British Administration was averse to grant independence unless it was assured of the racial harmony and equality in a new independent Malaya. As President of the UMNO, Abdul Rahman consolidated a political alliance with the Malaya Chinese Association to form the Alliance Party and later the Indian community Malayan Indian Association joined them in 1955. The coalition gained huge popularity among people though the UMNO members were initially reluctant to open the party to Chinese and Indian community. Abdul Rahman became the first Chief Minister of Malaya with the Alliance Party winning the first federal general election held in the same year. In 1955, he traveled to Japan, where he negotiated the Malaya Independence and 31 August 1957 was finally decided for its independence. Premiership of Malaysia Malaya became Malaysia with the emergence of Singapore, Sabah, Sarawak and Brunei in 1963. In 1961, Abdul Rahman called upon these states to form an amalgamation and was subsequently elected the first Prime Minister of Malaysia on 16 September 1963. However Singapore’s addition in the federal proved disastrous which increased the Chinese influx in the country. Abdul Rahman fearing, that Lee Kuan Yew’s Party could influence the voters in Malaya, started demanding Singapore’s exclusion from Malaysia. After endless clashes between Abdul Rahman and Lee Kuan, Singapore seceded and declared its Independence on 9 August 1965. Abdul Rahman’s regime came to downfall in 1969, when the Alliance Party lost most of its support in the general election that year. Abdul Rahman lost its support from the people within UMNO who were highly critical of his headship and eventually, an emergency committee captured the country from Abdul Rahman and declared a state of emergency leaving him with no power. On 22 November 1970 Abdul Rahman resigned from the position of Prime Minister and subsequently from UMNO in 1971. Other Activities In 1960, when he was still the Chief Minister, Abdul Rahman declared Islam the official religion of Malaysia and established the Islamic Welfare Organization (PERKIM) as a guiding body for Muslim converts. He became the president of PERKIM and served until a year before his death. As President of PERKIM, he organized the first International Quran Recital Competition in 1961. Abdul Rahman played a key role when the Organization of Islamic Conference was established in 1969 and served as its first Secretary-General. He was a co founder of the Islamic Development Bank and President of the Regional Islamic Da’wah Council of South East Asia and the Pacific (RISEAP), serving from 1982 till 1988. However he declared Islam the official religion of Malaysia, he stuck to his idea of running Malaysia as a secular country where people of different beliefs and religion lived and worked together. An enthusiastic sportsman himself, Abdul Rahman promoted many sports events in Malaysia, viewing is a medium to bring people of different race and religion together. He started an international football tournament in 1957 and was elected as the first president of Asian Football Confederation in the next year in 1958. He had a passion for horse racing and was a member of the Selangor Turf Club. Later Life Death In 1977, Abdul Rahman became the chairman of The Star, a newspaper which was banned in 1987 by Prime Minister Mahathir Mohamad because of its provoking columns that were harshly critical of the Malaysia’s government. Following a rift with in UMNO, he unsuccessfully tried to establish a new party UMNO Malaysia. In the general election of 1900, Abdul Rahman actively participated and widely campaigned against Mahathir Mohamad despite his worsening health. He died on 6 December 1990, aged eighty seven and his body was buried at the Langgar Royal Mausoleum in Alor Star. Family Children Abdul Rahman is believed to have at least four marriages in which only three are officially confirmed. His first wife was Meriam Ching, a Chinese woman who gave birth to two children Tunku Khadijah and Tunku Ahmad Nerang. After her death, Abdul married Violet Coulson, his former landlady in England. He divorced her and married Sharifah Rodziah Syed Alwi Barakbah and the couple adopted four children Sulaiman, Mariam, Sharifah Hanizah and Faridah. His fourth marriage to a Chinese woman Bibi Chong remained secret with whom; he had two daughters Tunku Noor Hayati and Tunku Mastura.

An Investigation of Safety Practices in the Saudi Arabia Construction Research Paper - 1

An Investigation of Safety Practices in the Saudi Arabia Construction Industry - Research Paper Example accidents 17 2.6.2 Continuous safety practices by top management 19 2.6.3 Continuous safety practices by safety professionals 20 2.7 Measurement of safety performance 20 3. Project Plan, Methods and Techniques 24 3.1 Project Plan 24 3.2. Methods and Techniques 24 3.2.1. Sampling 24 3.2.2. Data Collection 25 3.2.3. Data Analysis 25 3.3. Skills and Experience 26 3.4. Time Scale 26 List of References 27 1. Introduction 1.1 Background Saudi Arabia has experienced rapid growth over the last few decades. In 2011, the GDP growth rate was 3.8% (TradingEconomics, 2011). This is roughly an average for the 21st century with lows having occurred during 2002-2003 and 2010 and highs during the mid 2000s. Exports at present are over 200,000 million SAR and over 90% of these are oil exports, which account for 75% of government revenue. The rapid growth is therefore mainly due to increases in the kingdom’s oil revenues. ... The construction industry engages in designing, constructing and maintaining unique buildings. In Saudi Arabia, its growth in recent years has been remarkable, especially due to increased foreign investment from international companies seeking to expand their businesses. According to Saudi Arabia’s Infrastructure Report for the second quarter of 2011, Saudi’s construction industry is set to grow by 4% in 2011, and it will continue to grow at this rate for the next four years (Roberts, 2011). In particular, during the period 2011 to 2015, Saudi Arabia’s residential building construction is set to grow at a rate of 7.2% (Saudi Entrepreneurship, 2011). The Saudi construction sector is the largest and fastest growing in the Gulf region. The government is completing the establishment of six economic cities; it has invested almost SR513.8 billion during the period October 2008 to April 2009, and it is expected to spend around SR1.5 trillion over the next half decade (U S-SA Business Council, 2010). However, the construction industry is also one of the most highly hazardous industries. Its unique nature, difficult work-site conditions, human behaviour, and poor safety management are the main causes of accidents (Koehn and Chih-Shing 1995, 261). Unfortunately, despite the construction evolution in Saudi Arabia, the work methods, equipment and procedures are still unsafe. As an example, in a recent incident in Riyadh in January 2011, it was reported that three workers were killed and eleven were left injured when scaffolding collapsed (Abbas, 2011). Several other highly publicised accidents at construction sites have also taken place in Saudi Arabia in recent years. Regulations do exist but many

Health Beliefs of Haitians Essay Example | Topics and Well Written Essays - 1000 words

Health Beliefs of Haitians - Essay Example Always when a Haitian becomes ill, the first line of care is home herbal remedies. These are often utilized for the prevention and treatment of cold, fever, and stomach aches. Traditional treatments are passed on from generation to generation. It is difficult for them to accept Western approaches such as vaccination and cancer screening as they feel the treatment may make them ill and they have no prevention against it. Haitians believe that pain affects the whole body system and because of that they are frequently not able to tell you where the pain comes from. They also may come to the physicians office and be very vague about what is wrong with them because they see everything as the same (Salisbury.edu), either natural or supernatural. All deformities are considered brought on by an evil spirit. Haitians who have a chronic illness are cared for by family and friends, they seldom go to a nursing home. If they get to return home they will pay the spirits back by having a Thanksgiving ritual. Haitians also believe that a wheelchair means they are very sick and they will misunderstand if it is offered. Haitians do not talk about organ donation, nor do they believe in organ transplant. Pre-natal care is not an illness so there are most likely no prenatal care visits and it may be very difficult. Practitioners Most of the lower class in Haiti believes in Voodoo and that comprises about 85% of the population. They do practice Christian beliefs at the same time. There, according to the Haitians is not only a visible world but a spiritual world. The spirits of the deceased make up both good and bad spirits. Usually when there is an illness the Haitian goes to see the Hougan who is able to be a conduit to the Loas and provide a cure. If the patient has visited the Hougan several times and is not better, they may be referred on to the physician (Miller, 2000). If a patient is in the hospital here in the United States, they may want to go back to Haiti to see a Hougan, especially is they are not getting better. Physicians within the community of practitioners to treat Haitians must do what they can to understand the cultural significance of many of these beliefs in order to get screening and preventive care done. Chronicity and Psychiatry The role of the supernatural is very much a part of Haitian society. They feel that chronic illness as well as psychiatric illness is caused by the supernatural. Depression, psychosis, inability to perform activities of daily living and academic underachievement may often be seen as a curse or a spell placed on them. They often feel that this happens because they did not work hard enough of did not do something they should have done (Astrid & Shiela, 2002) and didn't. They may feel they were lazy or that someone had a grudge and put a spell on them through an evil spirit. Patients who are chronically ill are usually cared for at home by family and friends: nursing homes are almost never used. It should be remembered also that offering a Haitian a wheelchair is the same as telling they are very ill and may not get better (Salisbury.edu) In actuality, the Haitians deal with many chronic illnesses due

Business Ethics Essay Example | Topics and Well Written Essays - 500 words - 1

Business Ethics - Essay Example He decides about his behavior in the light of the ethical discussions because he has learned it through a sales training program which was conducted in the past. He came to the understanding that if he commits himself to ethical behaviors, his subordinates would also be ethical within their undertakings. He received instructions in writing within the sales training program and this formed the basis for his comprehension. Mr. James’ company employs a proper code of ethics because he has set his eyes on achieving the very best by remaining clean and transparent within his dealings with the people under him as well as the customers who visit his chain of stores. He maintains a proper relationship with them at all times. He leads his team through difficult situations with consummate ease because he has got a wait and see approach which is based on sound ethical values and principles. Companies in this day and age do have written codes of ethics because it dictates the way the empl oyees should conduct themselves. The punishments or penalties imposed on them for violating the ethical domains include the likes of suspension and other legal procedures, which are managed by the human resources management department within these companies.

Anopheles Stephensi Tissue-restricted Expression

Anopheles Stephensi Tissue-restricted Expression Tissue-restricted expression and alternative splicing revealed by transcriptome profiling of Anopheles stephensi Sreelakshmi K. Sreenivasamurthy1,2, Anil Madugundu1,3, Arun Kumar Patil1,4,5, Gourav Dey1,2, Ajeet Kumar Mohanty6, Manish Kumar1,2, Krishna Patel1, Charles Wang7, Ashwani Kumar6, Akhilesh Pandey1,8,9,10,11, T. S. Keshava Prasad1,2,4,* Abstract The sequencing of Anopheles stephensi, a major malaria vector in Asia has led to increased research activity to understand the vectorial ability of this mosquito species. However, tissue-based gene expression profiles of the annotated genes remain to be understood. In this study, we summarize the transcriptomic profile of four important organs of a female imago Midgut, Malpighian tubules, Fat body and Ovary. We identified over 21,000 transcripts in total, from all the four tissues corresponding to about 12,000 gene loci. This study provides an account of the tissue-based expression profiles of majority of annotated transcripts in An. stephensi genome and alternative splicing in these tissues. Understanding of the transcript expression and gene function at the tissue level would immensely help in enhancing our knowledge of this important vector and decipher the putative role of these mosquito tissues, providing the basis of selection of candidates for future studies on vectorial abil ity. Keywords: Mosquito, RNA-seq, differential expression, lncRNAs Introduction Malaria remains as one of the most debilitating mosquito-borne diseases till date. According to WHO World Malaria Report in 2016, there were ~212 million malaria cases in the year 2015, resulting in an estimated death of about 429,000 individuals globally. Most of these cases (90%) is in the African region with about 7% incidence in South East Asia. About 50% of the Asian malaria incidence and deaths has been in India1. The number of deaths attributed to malaria in India has been reported to be higher than the WHO estimates2. However, the latest updates on the cases and deaths reported in India has been limited to the National Vector Borne Disease Control Programme (NVBDCP), according to which there has been about a million cases of malaria reported in the year 2014 [http://www.nvbdcp.gov.in/malaria3.html]. Out of the 41 different Anopheline species reported as significant vectors for transmission of human malaria, An. stephensi is an important vector in India and South Asia3,4. Bein g the major urban vector, it is second most prevalent in India. It has been reported all over the country except the north-eastern states of Sikkim, Arunachal Pradesh, Mizoram, Nagaland, Manipur and Tripura5. Sequencing of the Anopheles mosquito genomes have resulted in a spurt of activity in the study of Anopheles mosquitoes. PubMed search with the keyword Anopheles resulted in 14,576 publications, majority of which have been after the year 2000 as shown in the Figure 1A. Majority of the studies post-genome sequencing has been focussed towards understanding the role of various genes and development of numerous methods to regulate their expression.   The overall aim of the community is to embark on a feasible means to control the spread of infectious organisms either by controlling the vector/mosquito population or by curbing or reducing their vectorial ability. In this regards, numerous studies have already been performed on the recently sequenced malarial vectors6-9. However, most of the studies are focussed on previously studied molecules with very few studies focussing on new target molecules. This could probably be due to the lack of reliable data owing to incomplete genome as semblies and annotations in the identification of such targets. We have tried to bridge this gap with a huge effort of supplementing the current efforts using an integrated approach of utilizing proteomic and transcriptomic data in the genome annotation and assembly in an array of organisms through our previous studies10-12. Although transcriptomic data played a major role in refining the annotations and assembly of the genomes in the previous study, the tissue-based expression profiles were not focussed on. The tissue-based expression profiles of the identified transcripts are the focus of this study. Tissue-based expression profiling in An. stephensi has been limited to salivary glands13, ovaries14,15, testes16 and hemocytes17 with most the studies being done on whole mosquitoes14,18,19. However, even with the availability of transcriptome data from ovaries, there are several issues. The study was mainly focused on identification of transcripts expressed in developmental stages and is of low throughput14. The other tissue-based expression studies published including one cDNA-based study of the salivary glands and another being cDNA sequencing of the transcripts from hemocytes, both tissues that were not included in our study. The focus of our study is on the Midgut, ovary, Malpighian tubule and fat body of a female An. stephensi imago. These tissues, along with the salivary glands play a very important role in the blood meal digestion and thus important for the life cycle of the mosquito vector and plasmodium species. However, we restrict ourselves to understand the molecular dif ference between these mosquito tissues in the uninfected sugar-fed state of the mosquito which we believe will provide the much-needed basic understanding of the role played by these tissues. To this extent, we performed comparative and deep transcriptomic analysis of these four tissues. Materials and Methods RNA isolation and sequencing Adult female An. stephensi mosquitoes grown at the NIMR field station, Goa, were dissected to obtain midgut, Malpighian tubules, ovaries and fat body. These dissected tissues were stored in RNAlater to preserve the RNA quality till RNA extraction. The RNA isolation and sequencing was performed as described earlier10,11. Briefly, the RNA isolated using Qiagen miRNeasy kit was used for the preparation of indexed RNA-seq libraries using TruSeq RNA Sample Preparation Kit v3. The indexed and pooled libraries were sequenced on two lanes (as technical replicates) of Illumina HiScan SQ platform. Read alignment and transcript assembly The raw reads were processed for quality filtration to remove ambiguous bases present due to the sequencing errors at the 3 end of the reads. Base quality filter of >20 was considered as good. FastQC (Version 0.10.1) tool was used to determine the quality of the raw data and poor quality calls with Phred score An. stephensi genome build (ASTEI2) downloaded from VectorBase (https://www.vectorbase.org/) using HISAT (Version 2.1.0)20 aligner with the default parameters. HiSAT2 was supplied with known annotations and Gene Transfer File (GTF), AsteI2.2 from VectorBase. The alignment of reads from each lane for each tissue was carried out individually against the reference genome resulting in eight different Binary Alignment Map (BAM) files. The .bam files for each tissue were then merged to obtain merged .bam files, one for each tissue. The aligned reads were assembled against the AsteI2.2 gene annotations, as reference, using the StringTie (version 1.2.1) assembler21. Assembled transcrip ts were further quantified and annotated into known and novel categories using the gffcompare in StringTie package as described earlier22. To determine novel transcripts as a transcript GTF file and all the StringTie assemblies were merged using StringTie-merge option. Novel isoforms and intergenic transcripts were obtained by comparing the merged StringTie assemblies of all the four tissues to the annotated transcripts from VectorBase using gffcompare. Coding potential of the identified transcripts was predicted by the use of the Coding Potential Assessment Tool (CPAT)23. Transcripts which were >200 bp in length with a CPAT score threshold of Identification of differentially expressed genes across four tissues Merged GTF file from StringTie was annotated in to different classes of transcripts using gffcompare with respect to the VectorBase annotations. Expression levels of transcripts as determined by the StringTie assembler were compared across tissues. The expression information from individual lanes were used as technical replicates for each tissue. Differential expression was computed using Cuffdiff after normalizing the data across samples by calculating Fragments per Kilobase of exon per Million Fragments Mapped (FPKM)24. The R-package version 2.16.0 of cummeRbund was used for visualization, analysis of RNA-seq data and cluster generation25. An overview of the analysis pipeline is provided in Figure 1B. To identify tissue specific transcripts, we initially filtered transcripts with FPKM value à ¢Ã¢â‚¬ °Ã‚ ¥ 1.0 in at least one among the four tissue types. We then applied the right-tailed t-test to identify the transcripts which are relatively high in abundance in one tissue as again st other tissues. Results and Discussion Transcriptome sequencing of four An. stephensi tissues Midgut, Malpighian tubules, Fat body and Ovary was performed to create a tissue-based expression profile. In total, about 500 million paired-end reads of 100bp were generated from all the four tissues, with about 55 million read pairs per tissue sample from two lanes. The expression levels of transcripts between the replicates and among the tissues were comparable. Figure 2A represents the inter-tissue and intra tissue transcript expression variations in the form of a distance-based heatmap. The variations are minimal between the replicates as expected and increases between the tissues with Ovary and Malpighian tubules being the most different. By following the standard alignment and assembly pipeline using the HiSAT2 and StringTie assembler, we identified a total of about 25,000 transcripts. However, after the initial filtering for the FPKM values (à ¢Ã¢â‚¬ °Ã‚ ¥ 0.1) only 21,500 transcripts were retained. The expression of th ese transcripts was comparable across tissues with the median FPKM value ranging about 2 to 3 in all the tissues as represented by the box plot in Figure 2B. Figure 2C and 2D provides the general distribution of the length and the FPKM values of the transcript assemblies across the four tissues. About 60% of the transcript assemblies were found to have FPKM value of 1 and above, while the average length of majority of the transcripts tend to be in the range of 1000 to 3000 bp. This shows an expected trend of a reliable depth and absence of any skewing. The Transcript assemblies were classified into different classes using gffcompare. However, in order to avoid over interpretation of the data we have only focused our findings on the known =, alternate j and intergenic unknown u class of the transcript assemblies for our analysis. In our analysis, we noticed that almost equivalent number of transcript assemblies were classified under the known (=) and the alternate (j) categories. In fact, the transcript assemblies in the j category exceeded the number of known transcript assemblies. A deeper look in to this matter showed us that due to the poorly annotated gene models (which is mostly based on the prediction program) for this strain, the untranslated regions (UTRs) of the predicted transcript models in the current annotation is missed. As a result, the transcript assemblies with the extension of the exonic regions supported by the reads, probably into the UTRs were classified as alternate transcripts. We are working closely with the VectorBase to improve the annotations of these predicted gene and transcript models for the An. stephensi Indian strain. Tissue restricted transcripts Majority of the transcripts identified (about 87%) were expressed largely at similar levels in all the four tissues, the remaining 15% of the transcripts identified seemed to have more of a tissue restricted expression. Figure 3 details the distribution of the transcript expression (expressed with FPKM values à ¢Ã¢â‚¬ °Ã‚ ¥ 0.1) among the previously annotated transcripts (Figure 3A), alternative isoforms (Figure 3B) and novel previously unannotated intergenic transcripts (Figure 3C). The majority of the transcripts in each of these groups are expressed in all the four tissues with only about 3 4% of the transcripts showing tissue restricted expression. Among the known/annotated transcripts identified, 241 were found to be exclusive to Midgut, 221 exclusive to Malpighian tubules, 479 transcripts in Ovary and 436 in Fat body. The distribution of tissue specific transcripts was similar in the alternative isoforms and novel intergenic transcripts of these four tissues with 61, 67, 146 and 77 isoforms exclusively identified in Midgut, Malpighian tubules, Ovary and Fat body. In general, there was a clear bias in the number of transcripts and transcript isoforms that were common between midgut and Malpighian tubules and similarly between fat body and ovary than amongst the others. The diversity of the transcripts identified was found to be maximal in Ovary with most the transcripts being identified in this tissue, followed by fat body. Midgut had the minimal number of transcripts identified, however, the expression levels of these transcripts, in terms of FPKM, were higher than that of other tissues. Novel splice variants and their expression Apart from the known/annotated transcripts, we identified a plethora of spliced (exon-exon) reads that were not previously annotated. Assembly of such reads along with the intra exonic reads led to the identification of >8500 transcripts that were spliced differently. These alternatively spliced isoforms represent the complexity of the transcript forms and their expression in the four tissues. A summary of the differential expression of these alternate isoforms is provided in Figure 3B. As in the case of annotated transcripts, most of the alternatively spliced forms were also expressed in all the four tissues. Only about 1-2% of the total alternate transcripts isoforms were found to have tissue restricted expression. Transcript isoforms were enriched maximally in Ovaries compared to any other tissue. With 146 isoforms restricted to ovaries, it showed the highest variation in the spliced forms among the four tissues although the FPKM values for these were comparatively lower than that of other tissues. Fat body had the least representation of the alternate isoforms. The splice variants identified included examples of intron retention, alternative 3 or 5 donor and acceptor sites, exon skipping and others. Different spliced forms were expressed in different tissues. An example of transcript expressed in different tissues is provided in Figure 4. The annotated gene ASTEI04270 belongs to the Gelsolin/Vilin/fragmin superfamily, coding for a single transcript isoform according to the VectorBase annotation. However, we identified six different isoforms for the gene. The original protein coded by the annotated transcript with a signal peptide and nine gelsolin-like domains that was highly expressed in Fat body followed by Malpighian tubules. The alternative isoforms included a shorter transcript encoded by the first 3 exons (ANSTF.3986.4), which retained only three of the nine gelsolin-like domains along with the signal peptide sequence that was highly expressed in fat body and least expression in ovaries. The other 4 isoforms encoding the exons from fo urth exon consists of 4 gelsolin-like domains. Isoforms ANSTF.3986.1 and ANSTF.3986.2 were highly expressed in midgut followed by Malpighian tubules but not identified in fat body and ovaries. Whereas, isoforms ANSTF.3986.5 and ANSTF.3986.6 were significantly expressed only in midgut. Proteins encoded by this superfamily typically consists of three to six gelsolin-like domains (GEL), with each domain playing a critical role in actin filament remodeling26,27. Novel intergenic transcripts In addition to annotated and alternate spliced forms of the transcripts in the known/annotated gene loci, we found additional loci in the genome of An. stephensi Indian strain. The reads mapping to these unannotated regions were processed to assemble putative transcripts that were categorized as novel/unannotated transcripts. We identified about 2700 transcripts with FPKM values above 0.1 in the intergenic regions of the genome that were previously considered to be non-transcribed. The expression of most of these intergenic transcripts were found to be similar in all the four tissues. However, Expression-based clustering and functional correlation Since An. stephensi genome was recently sequenced and is relatively less worked upon, there is limited information on the function of these genes and transcripts. However, Gene Ontology analysis based on their translated protein and the domain structures (Interpro domains) showed that most of the differentially expressed transcripts were found to have expected domains as per the perceived function of these respective tissues. The identified transcripts were segregated into clusters based on their expression levels in the four mosquito tissues. Among the various clusters generated using the cummerbund package, few of the clusters showed clear trends of expression. One of the clusters with about 950 transcripts showed similar expression in all the four tissues. Gene level ontology mapping of these transcripts showed that majority of the transcripts possessed generic domains such as protein, nucleotide and ion binding domains, transmembrane transport, proteolysis, oxidoreductase activity and signal transduction (Figure 5A). Transcripts found to be enriched in the Midgut (170) compared to other tissues were found to have proteolytic, protein binding, hydrolase and peptidase activity. Some of the midgut enriched transcripts were found to be involved in chitin and carbohydrate metabolism (Figure 5B). Transcripts enriched in Malpighian tubules (116) were found to be associated largely with transmembrane transpor tation, oxidation-reduction process, protein and ion binding events. Few of the transcripts were associated with transferase, ligase and lyase activities among other catalytic activities (Figure 5C). Ovary enriched transcripts (241) were associated more with the protein binding, nucleic acid and ATP binding, in addition to those having signaling domains and transport domains associated with intracellular signal transduction processes such as GPCR activity, protein phosphorylation and dimerization. As expected, these transcripts seem to be involved highly in cell cycle processes including DNA replication, microtubule organization, DNA repair and growth factor activities, which are crucial mechanisms for vitellogenesis (Figure 5D). Fat body enriched transcripts (170) were consistent with the role of fat body akin to the vertebrate liver. The transcripts enriched in fat body are associated majorly with transmembrane transportation, oxidation-reduction process, chitin binding and metabo lism, heme-binding and transport, in addition to oxidoreductase activities (Figure 5E). Identification and expression of long non-coding RNAs We compared the list of transcripts identified in our study to the list of transcripts that are annotated as non-coding RNAs in VectorBase. However, we failed to identify any of the annotated non-coding RNAs in our study since the annotated ones are largely rRNAs and other small ncRNAs. Due to the ribosomal RNA depletion employed in our study, we expected no rRNAs to be identified. However, in order to investigate the presence and expression of the long non-coding RNAs in An. stephensi, we assessed the coding potential of all the identified transcripts using the CPAT tool. From this, we identified 4,071 transcripts that satisfied the criteria for the long non-coding RNAs (lncRNAs) (Supplementary Table 2). That is, they were longer than 200 bases in length and were predicted to have a coding potential of Tissues considered in this study play an important role in the life cycle of the female mosquito. They are critical in blood meal digestion, metabolism, vitellogenesis, excretion, immunogenesis, Plasmodium sporogony and reproduction, which are associated with vector physiology, progression and malaria transmission. Mosquito midgut is involved in the initial storage and digestion of the ingested blood. The gut epithelium also provides site for development of oocysts and sporozoites (Sporogony). Blood meal induces pathways such as TOR, which ultimately leads to synthesis of proteins required for egg development. Fat body and ovary are known to be involved in the utilization of the nutrients from blood to enable vitellogenesis. Malpighian tubules are known to play an important role in the mosquito xenobiotics. Fat body cells (trophoblasts) and recently, Malpighian tubules have also been shown to be involved in the immune responses28-31 and is now being considered as targets for mosquito control28,31. Towards this end, we further evaluated the expression of genes previously reported to be involved in the vector-pathogen interactions32 across the four tissues (Table 2). The affordability and accessibility of sequencing-based techniques have resulted in numerous transcriptome-based studies even in An. stephensi14,15,17,19. However, due to the low depth of the other existing studies, no significant comparison could be performed between the transcript expression from our study to that of the other studies. We deciphered the genes reported to be involved in immunity14 and evaluated the expression information for the annotated transcripts and the novel alternate isoforms across the tissues (Supplementary Table 4). Although, there has been a recent study of the cDNAs from hemocytes, we could not compare the genes expressed in their study since hemocytes were not part of our study. Another reason for non-comparison was normalization issues caused by 36bp single end reads in their study, with only 49% of it mapping to the VectorBase assembly. We provide the deepest tissue-based transcriptome profiling for these four organs of An. stephensi (Indian strain), so far. Studies such as ours depicting the transcript variations amongst tissues in its physiological states provide important baseline information. In light of such information, analysis of gene expression data in the context of changes due to blood meal, infection of insecticide resistance might lead to new perspectives and insights. This, in turn, will facilitate the choice of novel targets for vector control and transmission blocking studies and other experiments as evidenced in An. gambiae33. Data Availability The RNA-sequencing data has been submitted to the Sequence Read Archive (SRA) from NCBI and can be accessed using the project accession number SRP043489. Supplementary data Supplementary data are available at www.dnaresearch.oxfordjournal.org. Funding This paper is funded by the joint research project to NIMR and IOB entitled Characterization of Malaria Vector Anopheles stephensi Proteome and Transcriptome (EMR/2014/000444) from the Science and Engineering Research Board (SERB), Government of India. SKS and GD has been supported by the Senior Research Fellowship by University Grants Commission (UGC) and MK was supported by the Council of Scientific and Industrial Research, Government of India during the study. Table 1. Transcript distribution number of transcripts in total, class code-based classification of transcripts in all four tissues and in individual tissues      Ã‚   All 4 tissues Midgut Malpighian tubule Ovary Fat body Total number of transcripts identified 21,500 17,461 18,812 18,616 18,685 Corresponding gene location identified 12,256 10,357 11,107 10,973 11,371 Total number of known/annotated transcripts = 9,722 7,508 7,883 8,001 8,015 Number of alternate isoforms/transcripts j 8,820 7,603 8,232 7,992 8,037 Number of novel transcripts (intergenic) u 2,694 2,136 2,458 2,396 2,398 Figure Legends: Figure 1. A. Graphical representation of the remarkable increase in the number of studies on Anopheles mosquitoes post genomic era. B. Workflow representation of the study pipeline followed. Figure 2. Overall representation of transcript expression. A. HeatMap representation of the Jensen-Shannon (JS) divergence between the different tissues and their technical replicates. B. Bar-chart representation of the tissue-based transcripts and their median expression in the log10(FPKM), showing normalized distribution. C. FPKM distribution curve of the transcripts identified in the four tissues. D. Distribution of transcript length across the four tissues. Figure 3. Venn diagram representation depicting the overlap and the tissue specific expression of the transcripts across the four tissues A. For VectorBase annotated transcripts. B. Distribution of alternate isoforms of transcripts. C. Distribution of novel intergenic transcripts. Figure 4. An example representing the novel spliced forms of the VectorBase annotated gene ASTEI04270. Isoforms identified due various splicing events and their expression across the four tissues. Figure 5. Expression-based transcript clusters and the functional enrichment of the classes of transcripts based on domain and Gene Ontology-based functional annotation. A. Transcripts having similar expression in all four tissues B. Midgut-enriched transcripts C. Transcripts overexpressed in Malpighian tubules D. Transcripts highly expressed in Ovary E. Fat body-enriched transcripts.

Marketing Strategy for Marks and Spencer Food Essay -- AVCE Business S

This assignment is about marketing, where I will produce a marketing strategy for a new or existing product. This unit introduces the major principle and functions of marketing; I will look on customer needs, and creating a suitable strategy or marketing mix, which will satisfy customer needs. In this unit I will experience the marketing process from carrying out initial research about a market, investigating the principles of functions of marketing and the way in which it contributes generating income/profit in a business. Marketing is the process of planning and executing the conception, pricing, promotion, and distribution of ideas, goods, and services to create exchanges that satisfy individual and organizational goals. Marketing also involves analyzing customer needs, securing information needed to design and produce goods or services that match buyer expectations, and creating and maintaining relationships with customers and suppliers. Marketing is essential to the success of any business. Its primary aim is to enable businesses to meet the needs of their customers and potential customers, whether then it’s for profit or not. To make my strategy successful for business it must: Ø Understand customer needs Ø Understand and keep ahead of competition Ø Communicate effectively with its customers to satisfy customer expectations. Ø Coordinate its functions to achieve marketing aims Ø Be aware of constraints on marketing activities I will also be considering the importance of developing and maintaining a relationship with its customers, potential customers and other stakeholders. I will look upon on establishing customer needs, methods of analysing marketing opportunities, and the m... ...ons can exert a major influence upon the stores’ accessibility and attractiveness to consumers. Planning the selection process as carefully as possible and using methods described should maximise the success. Marks and Spencer pays particular attention to social and geodemographics, along with consumer spend, before deciding on a location. Own brands are desirable products to offer, as they offer profitable margins and a high level of control over the marketing aspects of management. Efficient use of these products can increase store loyalty. As I did a oral presentation I used few pictures and such to show the packaging design, as I talked about the other product and the company, and mainly on one of the marketing mix ‘the product’. My presentation could have been bit longer with more details and also posters to show big images then small ones.

Proposal- Civil Engineering

Proposal To: Dr. Rod Zink From: Shivani Priyam SUBJECT: Recommendation Report â€Å"Topic† Revised Draft: Wednesday April 17, 2013 The purpose of this proposal is to summarize my recommendation report. Through this proposal, I will explain my theoretical situation in which I make a recommendation to the Assotech Limited’s Planning and Coordination team as to which type of master plan is best suited for their upcoming project. Through the course of this proposal I will explain Assotech Limited’s position in the Real Estate market in India.I will also compare two master plans since that will be critical in making a strong informative recommendation to the organization. Finally, at the end of my proposal I will outline my tentative schedule and breakdown the costs that I expect to incur while putting together my recommendation report. Introduction As Civil Engineer I have been hired by Assotech Limited to select the best master plan for a land area of 12. 062 acres, which comprises of  High Rise Towers of 2 BHK, 3BHK, 3 BHK + Servant room + Study & 4 BHK + Servant room + Study apartments as per the market requirements catering to buyers of all segments of the society.Some inventory of villas has also been introduced to take the advantage of huge demand for this. I have been hired to help the company choose between 2 possible master plans for the development. I will compare the two alternatives and recommend the best possible alternative for the company and the future residents. The company wants a master plan that takes into account the climatic conditions, sun and wind movement and incorporates these factors in our designs.I have to suggest the best alternative that will be the most efficient, the most cost effective option and also the most reliable over time for the homeowners and also maximize the use of natural elements in our buildings. Description of Case study The site is strategically located at Sector 99; in the upcoming New Gurgao n Area (India), which is in close proximity to the newly built Terminal-3 of Indira Gandhi International Airport, . The topography of the site is majorly flat with minor level differences.The client needs a master plan that will build Low rise development on the Southern side and high raise development on the Northern side for maximum utilization of natural resources. Gurgaon falls in the Composite Climatic Zone of India having all types of climatic characteristics from hot & dry, warm, humid as well as cold conditions. A climatic data glance over the past two decades show that hottest months are from May till June and the coldest months are from December till January, normal Annual Rainfall being 553mm. The Average Annual Wind Direction is North West to South East.The winds in this zone on an average are light but gain force in summers and monsoons. The site is located south East to the master plan. The wind direction being North West to South East will bring purified cool breeze i nto the site. Human comfort is a function of four primary variables; air temperature, air movement, humidity, and the mean radiant temperature of interior surfaces. Natural ventilation is an energy efficient way to increase human comfort because air movement increases heat transfer from the surface when cooler outside air replaces warm and humid indoor air.Natural ventilation, unlike fan-forced ventilation, uses the natural forces of wind and buoyancy to deliver fresh air into buildings. To maximize Natural Ventilation in buildings we need: * Set Building orientation to receive prevailing breezes * Cooling of breezes by vegetative shading * Introduction of water bodies along the wind path to control temperature. * Architectural devices such as wind chimneys, atria, courtyards, windows, and operable blinds to induce natural air flow. The Two Plans:The two types of master plans that Assotech limited are taking under consideration incorporates all the major factors such as the climatol ogy, wind, solar path and solar gain but vary in terms of the amount of energy and cost it can save which is where my job begins. The first plan is called the Option 1 and the second plan is called Option 2. Before a decision on the two plans can be made, Environment clearance certificate needs to be obtained and the two plans needs to be tested upon three major factors: 1.Strategically Oriented buildings to maintain apartment temperatures through wind and sunlight. 2. Natural ventilation, unlike fan –forced ventilation, should use the natural forces of wind and buoyancy to deliver fresh air into buildings. 3. Should use temperature friendly materials for optimal apartment insulation. Comparative study of the two plans: The comparative study here shows the total energy and cost savings fro the two options. It presents a very drastic contrast between the two options with regards to AC cooling, Heating systems and Day lighting in the areas.This table highlights the energy savin gs with respect to the three main factors and also clearly states which option is the most efficient one. Take example of one bedroom of 150 -170 Sq. ft. Average running of 175 days in a year | Option1| Option2| A C (summers)| | | Connected load| 1. 5 tr| 1. 5 tr| operational load| 1. 3 tr| 1. 5 tr| total energy saving/ day| 2. 0 KW| NIL| Heating (winters)| | | Connected load| 2. 0 KW| 2. 0 KW| operational load| 1. 7 KW| 2. 0 KW| total energy saving/ day| 7. 0 KW| NIL| Day lighting| | | Connected load| 100 W| 100W| operational load| 65 W| 65 W| otal energy saving/ day| 70 W| NIL| Saving due to option 1 = 6581. 625 INR or 121. 47  US Dollar| In AC cooling systems, it shows a difference of 0. 2 tr. between the two options regarding operational load. It also shows the total energy savings if we go with Option1- Master Plan Green. In heating systems, it shows a difference of 0. 3 tr. in terms of operational loading, hence contributing majorly to towards total energy savings with optio n 1. In Day lighting, although there isn’t any loading difference but option 1 contributes 70 W worth energy saving, as compared to option 2 which contributes NIL.In conclusion, as it is evident from the comparative table, option 1 is a more efficient, cost effective and the most reliable option for our consumers. Option 1- Master Plan Green The massing on the site is such that to maximize the views from the Expressway. The blocks on the North and North West get the benefit of views of the Master Plan Green. The hierarchy of heights on the site respects the Vaastu Principles with lower tower on the North East and increasing heights towards South West. The geometry of the site has also been considered.The entrances of the site are at North East and South West with reference to Vaastu requirements. The central location of the Clubhouse gives an easy access from all parts of the site. The Club also has a direct access to avoid congestion on any part of the site. All the building s on the site face Central Green Courtyards. The site is divided into two huge green courts flowing into each other through a central lawn. Option 2- Master Plan White This option gets the benefit of the Natural Resources that is Wind and Sun.The Wind Movement has been taken care of by placing the building blocks strategically to get the advantage of natural ventilation in maximum number of apartments. The peripheral road gives a direct access to all the blocks with their separate drop offs. The placement of Villas on the Southern edge of the site and Taller buildings on the Northern edge allows Sun penetration in maximum number of apartments. Decision Criteria: In option 2 there is a linear tower in the central court,  this makes a closed courtyard comparing with Option 1.After closely observing the shadow diagram of both the options I concluded that option 1 has less shadow towers falling on each other and have open court yard (from club side) thus having better cross ventilatio n for  all the towers and its units. The minimum amount of shadows helps us in winters and reduces the requirement of heating load in overall load capacity as well as operational time when compared with option 2. Same is case for cross ventilation. Option 1 reduces the heat, makes the indoor spaces cooler as compared to option 2 thus reducing the load on the air conditioning. Prospective Audience:My primary audience would be the Manager of the Planning and Coordination team, who will read the report and recommendations and decide what he/she believes, will work best for his/her situation. The secondary audience will be the owners and management of the construction company. They will be making the final decision for the company and decide if the recommendation that I give to them will be best for their situation and whether or not they will be using those master plans. They will also check to ensure that the recommended mater plans meets all of the requirements that they have given to me as their engineer.Another audience for the report would be the State Environment Impact Assessment Authority who is in charge of the entire environment related factors will have to approve of the plan to make sure it will meet all of the regulation in the areas. Work Schedule For Implementation Of The Plan: The work schedule will begin as soon as the final proposal is handed in and will finish the day that the report is due. Task| April 1st– 8th | 9th-22nd| April 23rd- May 5th | 6th -12th | 13th– 19th | May 20th -June 3rd | Research systems| | | | | | | Form idea on better system| | | | | | | Initial Report draft body| | | | | | |Report front and end matter draft| | | | | | | Review and edit| | | | | | | Finish report and print and binding| | | | | | | Cost of Publication for the plan: The costs for the two options I am considering in my recommendation report are charted below: Option| Cost| Option 1 Air Conditioning unitsHeating UnitsVentilation strategiesSunli ght incorporated tower structure| $6. 48 /- per sq. ft. | Option 2 Air Conditioning unitsHeating UnitsVentilation strategiesSunlight incorporated tower structure | $10. 78 /- per sq. ft. | I have decided to go with option 1. Total savings due to option 2 is 121. 47  US Dollar.Schedule for the recommendation report: I feel as I navigate through this project I would need to plan and stay focused to accomplish all tasks in a timely manner and hence my planner for this recommendation report would be: Task| Week 11| Week 12| Week 13| Week 14| Week 15| Week 16| 1| Proposal| | | | | 2| | | Initial Draft| | | 3| | | | | Complete| | 4| | | | | | Final| Qualifications: This project falls under my current work related responsibilities. As a civil engineer in Assotech Limited, I have a wealth of resources and knowledge available to conduct a realistic analysis for the two master plan alternatives.I also fully understand the pros and cons of the two options, which would help me to see the effe ct of each on the company and how it would result in achieving the main aim of the project. Since, I am able to utilize the resources I have available through Assotech Ltd. my cost for this project will very minimal. Cost of required materials I believe these could be the possible costs while creating the final product. The costs would include the cost of color printing, and the coil binding. Thus the break down of the cost is listed below: Items| Cost| Color printing| $0. 49| Paper| $0. 0| Coil Binding| $ 3. 50| Total | $3. 99| ————————————————- Permission to Continue: After reading the proposal I am asking for permission to carry onto the recommendation report for the task of finding a suitable master plan in relation to climatic conditions and energy usage for Assotech limited for their project in Gurgaon, India. Citation requirements: 1. Assotech Limited. . 2012. Assot ech Blith [Internet]. Noida (UP): Assotech Moonshine Urban Developers Pvt Ltd; [2012 January, cited 2013 February]. Available from: http://assotechlimited. om/our-projects/featured-project-assotech-blith. html The website is the official website of Assotech Ltd. I am using this website as one of my sources for the recommendation report since this page would help me find information on the company and help me with my analysis and findings. I have used this website for obtaining the data for the comparative study, the cost of publishing and the work schedule for the plan to be implemented. 2. 2009. Gurgaon (UP): Sustainable Habitats- Teri Initiative [cited 2013]. Available from: http://www. sustainable-buildings. org/files/composite_SolarEnergy. df As we know, large quantities of energy are consumed in providing lighting, ventilation, and thermal comfort in the buildings. Using proper planning and design the architects have made it possible to reduce the wastage of energy and lighting . Thus, this website helped me with all the topography and climate related information required for my comparative study. Secondly, this website provided me with the information I needed to base my comparative options which were AC cooling, heating system and day lighting. Thirdly, it also gave me information about the location of the construction. 3. A R COP. 007. Planning and coordination [Internet]. 2007. Arcop Associates Pvt. Ltd, cited 2013] Available from: http://www. arcop. co. in/planningandurbandesign. htm ————————————————- This website helped me with my master plan options and cost related questions. I used this website to obtain the visuals I needed for my report. It provided me with all the details along with the visuals for the master plan green as well as the master plan white. ——————————â €”———– [ 1 ]. Vaastu- â€Å"ancient doctrine about science of construction and architecture. †

Water Quality

Water Quality Coagulation and Flocculation These are the initial procedures during treatment of water. Chemical substances possessing a positive charge are added to water in this compartment. The positive charge neutralizes the negative charge from dirt leading to the formation of huge fragments known as floc.Advertising We will write a custom essay sample on Water Quality specifically for you for only $16.05 $11/page Learn More Sedimentation Floc is heavier than other particles present in water. Therefore, this process allows floc to remain at the base of the tank. Filtration After the sedimentation process, the transparent water at the top of the tank moves across filters consisting of assorted components such as sand, charcoal or gravel. These components have different pore sizes that facilitate the removal of dissolved particles such as dust, microorganisms, and chemicals. Disinfection Disinfectants such as chlorine are then added to the filtered water in the disinfec tion compartment to eliminate any remaining contaminant. The chemicals also safeguard the water from germs during storage and transportation to homes. Storage Clean water is then stored in reservoir tanks from where it is piped to consumers. In the U.S.A., chlorine is generally preferred as a disinfectant over ozone because it has a residual. The presence of a residual is important because it shows that water contains an adequate quantity of chlorine to kill all microorganisms. It also provides defense against recontamination in the course of storage. The existence of free residual in treated water is associated with the absence of harmful microorganisms. Consequently, it is an important factor that gauges the potability of water.Advertising Looking for essay on environmental studies? Let's see if we can help you! Get your first paper with 15% OFF Learn More In recent years, ozone has been replacing chlorine as the primary disinfectant in the U.S.A. One key a dvantage of using ozone to treat water is that there are few byproducts released into the water from the process. The release of many byproducts into treated water usually puts such water at risk. During chlorination of water, additional steps are usually required to get rid of these byproducts. However, ozone treatment of water evades these additional procedures. One other benefit of ozone water purification is that there are no added chemicals that interfere with the natural taste of water. Therefore, the resultant water does not have the characteristic taste of chlorine. However, ozone treatment of water also has disadvantages. It is thought that this procedure releases little quantities of bromate, which is thought to be a carcinogen. In addition, ozone treatment does not offer any residual effect. Therefore, any harmful organism that endures the oxidation procedure evades the entire treatment process.

Amelia Earhart Biography paper Essay Example

Amelia Earhart Biography paper Essay Example Amelia Earhart Biography paper Paper Amelia Earhart Biography paper Paper Contemporary World Issues Biography Paper Boaz 3B By: Jerome Bircumshaw Even to this day some people believe women are not capable of achieving what the male can do. However one women in 1928 changed the image of the face of women forever. Soon to be an American aviator, Amelia Earhart was born on July 24, 1897, in Atchison, Kansas. She was the daughter of a successful railroad attorney. Because of her fathers occupation, Amelia spent her childhood growing up in many different towns. Her fascination for adventure and thrill seeking started off at a young age where Amelia and her big sister Muriel decided one day that they wanted to make a plane. There was a lack in material, so they decided to make a rollercoaster instead. Even though neither one of the girls knew how to make a roller coaster, they got some wood from an old wooden fence they tore down. First, they made the car by placing the bottoms of roller skates under a big piece of wood and the rest of the wood was used to make a slide that went from the top of a woodshed to the ground. With Amelia and her bravery, she went first and rolled quickly down the unstable slide. The car hit the ground and Amelia bounced into the air and turned into a somersault, luckily escaping injury. Years after the family moved to Des Moines, Iowa where they attended a state fair. That is when Amelia got to see her first airplane which did not impress Amelia. The airplane was made of wood and wires and reminded Amelia of a big orange crate. Because of this, she thought she would never own an airplane. Even though she was young at the time Amelia knew she wanted to do something fun in the future. One night in 1910 Amelias father took both of the girls out to see Halleys comet which passes by once every 76 years. She was really impressed by the sight and pointed out one specific star and asked if it had a name. That is Vega, her father told her. It is one of the most beautiful stars of all. Amelia shut her eyes and wish on Vega that she could do exciting things when she grew up. This wish certainly came true. The following years were good ones for Amelia, as she learned how to swim and ride horses. After she finished her high school education, she attended a school in Toronto, Canada where she visited her sister and took a course in the Red Cross First Aid. She thought being a nurse was going to be her occupation growing up as she oved helping the wounded soldiers and everyone loved her help. Years after however, she left and furthered her education as a premedical student at the Columbia University in New York. It was going well for Amelia, but her parents insisted she should move back to California with them. Shortly after, Amelia was living in California with her parents when she read in a newspaper that there was an air meet near Los Angeles. Amelia went to the air meet, with her father and they watched the planes do stunts and daredevil tricks. That was the beginning of Amelias aviation adventure. She decided she wanted to fly, ut her parents could not afford lessons for her, so Amelia got a Job to cover the expenses. Her teacher was a women, and one of the only women in the world who knew how to fly. This gave Amelia more hope that one day she would be able to fly by herself. One day she finally got to fly solo as her instructor watched. She was not the best pilot and had a rough landing, but she could say she flew an airplane. Amelias mom was proud of her and helped her to buy her own small airplane. Amelia soon became a good pilot and was reminded by men and women constantly how good her aviation skills were. Planes did not fly very high back in the early 1900s but that never stopped Amelia from setting a womens record for high flying. She flew 14,000 feet in the air, almost three miles high. With the knowledge we know now of Amelias great achievements, it is surprising to think that she had a hard time deciding on what she wanted to do. Of course she wanted to fly, but she also wanted to do some useful work. It was at Denison House in Boston where she found a social center. This is where she taught the children how to play games. She looked after them while their mothers were working, it was like a aycare. If Amelia was not taking care of the kids, she was flying. All the children were proud of her and looked up to her. In 1927, Amelia read the newspaper and learned that Charles A. Lindbergh had flown an airplane from New York to Paris. It was a major accomplishment because flying airplanes across the Atlantic was not only a hard task to accomplish but no one had ever successfully made the Journey until then. Lindbergh was the first man who accomplished the flight in history. Several women had tried to make the Journey, but none had made it. Three young women lost their lives trying. It was in Boston Massachusetts where Amelia received a call to be the first female passenger on a transatlantic flight, in 1928. Amelia asked to be a pilot, but she did not know how to use instruments which were a new invention in planes to help them from getting lost. She soon after promised herself that she would learn how to use aviation instruments. The weeks following, Amelia was sent to New York where she met her future husband and book publisher George Putnam. He was the manager of the ocean flight, and they quickly realized they had a handful of similar interests. Amelia got er first glance at the plane named Friendship that was chosen for the trip and she was pleased to say the least. The Friendship had three motors, and instead of wheels it had pontoons which meant it could float, but taking off in water was no easy task since wind was the main component to take off. The friendship had gold wings which Amelia thought was beautiful but she was informed that the gold was not for looks but instead it make the aircraft easier to spot in case the pilot had to go down in the ocean, so the plane would be spotted. One early morning in 1928, Amelia thought the weather seemed right, so the pair umped in the plane, started the engine, and sped off across the water. The first destination was Trepassy Harbor, in Newfoundland, off the coast of Canada so the airplane could be refueled before the long Journey. After they refueled and planned to head to Europe, the weather became extremely bad with thick fog and rain. Days went by, and the weather seemed to keep up. Amelia started losing hope, and then she heard the news about another young women who had flown from New York to Newfoundland. She and her pilot were staying in a town nearby. Her name was Mabel Boll, and her plane was named the Columbia. Both of the women agreed that the trip was not a race, but secretly both women wanted to be the first to complete the transatlantic Journey. Back in the United States, the newspapers called it a race. Headlines read Rival Women Flyers Still Held by Bad Weather, and Columbia ready for take off, then in big print Friendship Takes Off. On June 17, 1928, Mabel said the weather was too bad to take off, and Amelia would be the first to reach Europe. Quickly into their flight, Amelia and her pilot rode into heavy fog and were hoping to reach the coast of England before they ran out of gas. After several of hours, there was little gasoline left, but the fog life savingly lifted, and a boat was seen in the distance. However, the radio was not working properly and after several attempts to contact the boat, they simply flew on hoping to find land. Shortly after, fishing boats were seen in the distance which meant there must be land nearby but the direction was not known, so they flew forward, hoping to find something, and luckily, they spotted land in the distance and Stultz brought the plane down in the Burry Port, on the coast of Wales. Amelia was a heroine. As the first women to fly across the Atlantic, she was treated as national idol and hero. She had a positive impact on society giving hope to children and adults of both genders proving that women could do anything a man could do, or even better because her flight beat Lindbergh in the total time it took of twenty hours and forty minutes. When the crew returned to America Amelia along with the help of George Putnam published a book call ed 20 Hrs. 40 Min. While in America, Amelia flew across the country and became a better pilot than she had ever been before in her life and learned how to fly safely with instruments. She changed the female view of flying positively and became a role model to people all ver the globe. Around this time Amelia purchased her own airplane and named it Vega. She was set out to fly the transatlantic solo and be the first women to do so. On May 20, 1932, the trip to Europe alone began. Although she did not have an easy flight with ice forming on the wings and fire leaking out of the exhausts, she managed to reach Europe in a historical fifteen hours and eighteen minutes. Amelia was invited to many parties. One of which included a dance with the soon to be King of England. After their marriage George and Amelia were invited to have dinner with he President Hoover and his wife at the White House. Amelia proved that women had as much courage as men and was soon the most famous woman alive. She took the President and his wife on a short ride in a plane above Washington while wearing a evening gown and slippers. Time went by and Amelia became a teacher at Purdue University in Indiana when she decided she really wanted to make history. Amelia told George, she wanted to fly the globe, It wasnt an impossible task, but she wanted to fly around the equator which was the hardest and longest way to fly. Amelia did have a downfall and it was not knowing when to quit. With the help of George she set off on the flight from California one morning in March of 1937. She reached Hawaii in less than sixteen hours but spun into a ground loop and crashed the plane which cost eighty-thousand dollars. The plane was shipped back in pieces and fixed, and on June 1, 1937, Amelia decided to try the flight again but this time she sat off the other direction. She flew over many countries such as Africa, India and New Guinea. It was when she was supposed to stop on a small island call Howland Island that people started worrying since Amelia never reached the Island or her final destination. July 2, 1937, would be a day remembered forever, because that is the day Amelia set off from New Guinea to Howland and was never seen again. Many reports claimed she was captured or stranded in the ocean or on an uninhabited island somewhere. But the truth, however, was never discovered. I believe Amelia was one of the greatest feminist role models by changing the face of women across the globe. She was nothing short of impressive, and I would recommend this book to anyone of any age or gender because Amelia had a life that is a real eye opener and proves the there is no dream that can not be accomplished.